tri-seal carton closers

MODEL HMC-900 CLOSER

The model HMC-900 Closer is designed to close a variable range of tri-seal cartons in a small 4' x 10' area of floor space. The A E. Randles Company has built simple adjustments into the HMC-900, requiring only a few change parts for each size, and changeover time of 30 minutes or less.

Standard Equipment

Carton sizes: 5" to 12" long, 3 1/2" to 8" wide, 1" to 3 1/2" deep
Electrical:
115 vac 1-phase
10 safety microswitches with dual photoeye "jam" sensors
Start/stop station with 10 extra feet of cable
Glue pot thermoswitch indicator lights
Frequency controller
Guarded handwheel for manual machine rotation
Debossing coder
Torque limiter on motor gearbox
Easy access sliding panels
Braked casters
Carbon steel frame with all parts that touch the carton in stainless steel (shafts are Stainless steel and skins are aluminum.
Equipment manual

Options

Flighted conveyor for speeds up to 100 cpm
Stainless steel construction
230 or 480 vac electricals
Digital temperature control and read out
Larger reservoir glue pots
Belted discharge conveyor
Iinking coder roller attachment
Double row coder
Change parts for new carton size

MODEL HMC-1100 CLOSER

The model HMC-1100 Closer was designed with the larger tri-seal carton in mind. We were able of keep this machine relatively compact with a useable floor space of 6 1/2' by 14'. A changeover time of 30 minutes or less is achieved with a fully crank adjustable compression area and rail.

Standard Equipment

Speed range from 5 to 80 cpm
Carton sizes: 7 1/2" to 18" long, 5 1/4" to 12" wide and 1 1/2" to 5 1/4" deep
Electrical:
220 vac 3-phase
Safety microswitches on all access areas with dual photoeye jam sensors
Start/ stop station with 10 extra feet of cable
Glue pot thermoswitch indicator lights
Frequency controller
Guarded handwheel for manual machine rotation
Deboss coder
One point clutch on motor gearbox
Braked castors
Full lexan guarding
Carbon steel frame with all parts that touch the carton made from stainless steel, shafts are stainless steel and skins are aluminum frame painted with "steel it" brand epoxy Primer and paint
Equipment manual

Options

480 vac electricals (1 and 3 phase)
Stainless steel construction
Digital temperature control and readout
Double row coder or inking coder
Change parts for new carton size

Rugged cam- and chain-based designs have been proven themselves and been refined over 50 years.

Customization

Our customers work closely with us to customize their machine. All tooling is custom designed, hand built and goes through a rigorous Quality Assurance to make sure it runs flawlessly the first time. To discuss options on your machine, please contact us directly.

Parts & rebuilds

A.E. Randles equipment is built to withstand decades of use. We maintain an inventory of parts and refurbished equipment--factory-certified and with the same warranty as our new equipment. We can also rebuild and upgrade your existing equipment with modern electrical and safety components. Please contact us directly.

Packaging Machinery Manufacturers Institute